Geist G1014 Manuál s instrukcemi stáhnout pdf (Strana 3)

GM1003 Rev 2

Rev Date: 7/28/2014

Specifications

Overview

The BRE and VRTE Series products are Power Distribution Units (PDU) intended for connection to

a 20 Amp AC Mains circuit. The BRE and VRTE Series PDUs connect to AC Mains power through

an IEC-320 C19 style AC Inlet. These PDUs are rated 125/250 Vac, 50/60 Hz, 16 A and can

optionally be configured with single pole thermal breakers or hydraulic-magnetic circuit breakers

used for supplementary over-current protection of the output receptacles

. The BRE and VRTE

Series PDUs can optionally be configured with a Geist Power Meter that provides local monitoring

and display of Current, Voltage, Wattage, and Power Factor.

Environmental

Temperature

Operating: 10°C (50°F) min 45°C (113°F) max

Storage: -25°C (-13°F) min 65°C (149°F) max

Humidity

Operating: 5% min 95% max (non-condensing)

Storage: 5% min 95% max (non-condensing)

Elevation

Operating: 0 m (0 ft) min 2000 m (6561 ft) max

Storage: 0 m (0 ft) min 15240 m (50000 ft) max

Electrical

See nameplate for unit ratings.

Receptacle Ratings

IEC-320 C13 125/250 Volt, 15 Amp (per Receptacle Bank, North American Units)

IEC-320 C13 125/250 Volt, 10 Amp (per Receptacle Bank, Global Units)

CAUTION: DOUBLE POLE NEUTRAL FUSING CAN BE PRESENT. When single pole thermal breakers

are used, one breaker is provided in the hot conductor path and one breaker is provided in the

neutral conductor path. The PDU should only be serviced by the manufacturer.

Receptacle ratings give nameplate component voltage and current ratings. Receptacle output

voltage will be equal to the voltage of the AC Mains supply used to power the PDU.

1 2 3 4 5 6 7 8 ... 15 16

Žádné komentáře

Geist G1014 Manuál s instrukcemi Strana 3